CIP & SIP Systems

Ahura Aqua engineers automated Clean-in-Place and Sterilization-in-Place systems for dairy, beverage and pharmaceutical plants — cleaning and sterilising tanks, lines and reactors in situ, without dismantling, for both sterile and non-sterile applications.

The two run in sequence: CIP removes the soil; SIP removes the survivors. Every wetted part is sanitary by design — SS316 / 316L construction, crevice-free and drainable — to eliminate dead legs and the risk of recontamination.

TANK 01

CIP Tank

Stores rinse water, caustic & acid

PUMP 02

Supply Pump

High-velocity flow ≥ 1.5 m/s

HX 03

Heat Exchanger

Heats solution to wash temp

MF 04

Micron Filtration

Traps detached soil

RO 05

RO / Membrane Skid

Equipment being cleaned

RET 06

Return & Divert

Conductivity-based recovery

↺ Recirculate to CIP tank

TANK 01

Jacketed SIP Tank

Generates & heats the sterilant

PUMP 02

Multi-stage Recirc. Pump

Circulates through the train

RX 03

Reactors

Equipment being sterilized

Sanitary MOC SS316 / 316L wetted · SS304 frame

Crevice-free Dead-leg < 3D Fully drainable ASME BPE