AHURA AQUAWater Systems
Home/ Services/ Comprehensive Water Optimisation/ System Performance Checks
Service · Comprehensive Water Optimisation

System Performance Checks

Current performance, measured against the standards your plant was designed to.

{{ t }}

Most plants have no idea how far they have drifted, because nobody has compared the plant as it runs today against the numbers it was designed to hit. A performance check does exactly that, one component at a time, in a single day on site.

You end up with a written evaluation of every stage — what it is achieving, what it should be achieving, and what to change. It is a one-time, fixed-cost activity and the sensible first step before committing to any contract.

{{ s.label }}
{{ s.value }}
{{ s.unit }}
Where This Sits Start here

Comprehensive Water Optimisation is a three-part offer. The performance check is the diagnosis; everything after it is treatment.

Scope — Component by Component Media, equipment, hydraulics

Each stage gets a media and equipment check, plus the hydraulic and quality measurements that reveal whether it is doing its job for the stage that follows it.

{{ c.code }} {{ c.n }}
{{ c.name }}
  • ✓ {{ ck.text }}By client
v · RO Reverse Osmosis — the deepest check
Operating parameters vs design parameters
{{ g.label }}
{{ g.title }}
{{ it }}
{{ g.note }}
Client Scope
What we need from you
A few inputs sit outside our scope. Having them ready on the day is what lets the check finish in one visit.
{{ cs.label }} {{ cs.value }}
What You Receive Seven findings per component

A detailed report on each component — PSF, ACF, softener, UF, RO — carrying evaluation, performance and specific recommendations under each of the following heads.

{{ f.n }} {{ f.title }} {{ f.desc }}
Sample Report Page
Findings are written against your design parameters, so every recommendation carries the number it is trying to recover.
Note Instruments must be calibrated every six months, or as performance dictates. Calibration remains within the client’s scope.
PDF
Full Document
Comprehensive Water Optimisation
The complete offer in one document — including the full terms of contract and everything held outside scope. We will email it to you.
✓ {{ dc }}
Where should we send it?
{{ formError }}
We use these details to send the document and follow up once. No lists, no forwarding.
✓
On its way.
We have sent Comprehensive Water Optimisation to {{ email }}. If it has not arrived in a few minutes, check your spam folder.
Next Step
One day on site. A written answer on every stage.

Send us your feed water analysis and design parameters, and we will confirm a date. Fixed cost, no contract commitment.